Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
EAU01319
Seat
To remove the seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2. While holding the key in that posi-
tion, lift the front of the seat up,
and then pull the seat off.
To install the seat
1. Insert the projection on the rear of
the seat into the seat holder as
shown.
2. Push the front of the seat down to
lock it in place.
3. Remove the key.
NOTE:
_
Make sure that the seat is properly se-
cured before riding.
_
EAU00263*
Helmet holder
The helmet holder is located under the
seat.
To secure a helmet to the helmet
holder
1. Remove the seat.
2. Attach the helmet to the helmet
holder, and then securely install
the seat.
1. Seat lock
2. Unlock.
1. Projection
2. Seat holder
1. Helmet holder