Filter
Top Products
PERIODIC MAINTENANCE AND MINOR REPAIR
6-17
6
14. Install the fuel tank as follows.
a. Place the fuel tank in the original
position, and then connect fuel
hose B and the hoses shown.
EW000072
WARNING
_
●
Before installing the fuel tank,
make sure that the fuel hoses
are not damaged. If any fuel
hose is damaged, do not start
the engine but have a Yamaha
dealer replace the hose, other-
wise fuel may leak.
●
Make sure that the fuel hoses
are properly connected and
routed, and not pinched.
_
b. Install the nuts.
c. Connect fuel hose A.
15. Install the air induction system
cover by installing the bolts.
16. Install the seat.
Silencer case air filter element
To replace the air filter element
1. Remove the fuel tank. (See steps
1–3 under “Air filter case ele-
ment”.)
2. Remove the silencer air filter case
cover by removing the screws.
1. Hose (× 2) 1. Silencer air filter case cover
2. Screw (× 4)