Filter
Top Products
7-32
CROSSING A SLOPE
Traversing a sloping surface on your ATV
requires you to properly position your weight to
maintain proper balance. Be sure that you have
learned the basic riding skills on flat ground
before attempting to cross a sloping surface.
Avoid slopes with slippery surfaces or rough ter-
rain that may upset your balance.
As you travel across a slope, lean your body in
the uphill direction. It may be necessary to cor-
rect the steering when riding on loose surfaces
by pointing the front wheels slightly uphill. When
riding on slopes be sure not to make sharp turns
either up or down hill.
If your ATV does begin to tip over, gradually
steer in the downhill direction if there are no
obstacles in your path. As you regain proper bal-
ance, gradually steer again in the direction you
wish to travel.
POTENTIAL HAZARD
Improperly crossing hills or turning on
hills.
WHAT CAN HAPPEN
Could cause loss of control or cause the
ATV to overturn.
HOW TO AVOID THE HAZARD
Never attempt to turn the ATV around on
any hill until you have mastered the turn-
ing technique as described in the Owner’s
Manual on level ground. Be very careful
when turning on any hill. Avoid crossing
the side of a steep hill if possible.
When crossing the side of a hill:
Always follow proper procedures as
described in the Owner’s Manual.
Avoid hills with excessively slippery or
loose surfaces.
q
WARNING
5TH-9-15-2 6/15/05 2:55 PM Page 7-32