Filter
Top Products
8-9
1. Drain bolt
4. Install the drain bolt and tighten to specifi-
cation.
5. Fill the final gear case with oil.
cC
Be sure no foreign material enters the final
gear case.
6. Install the dipstick.
7. Check for oil leakage. If oil leakage is
found, check for the cause.
q
Tightening torque
Drain bolt:
23 Nm (2.3 m0kgf, 17 ft0lbf)
Recommended oil:
SAE80API “GL-4” Hypoid gear oil
Oil quantity:
0.12L (0.11 Imp qt, 0.13 US qt)
5TH-9-15-3 6/15/05 2:56 PM Page 8-9