Filter
Top Products
EBU00872
Clutch adjustment
1. Remove the rubber cap.
2. Loosen the locknut.
3. Slowly turn the adjusting bolt clockwise
until resistance is felt. Then turn it 1/8
counterclockwise.
1. Rubber cap 2. Locknut 3. Adjusting bolt
4. Tighten the locknut to the specified torque.
NOTE:
Turn the adjusting bolt clockwise to decrease
the clutch free play and turn it counterclockwise
to increase the free play.
5. Install the rubber cap securely.
8-24
q
w
e
Tightening torque:
8 Nm (0.8 m0kgf, 5.8 ft0lbf)
5TH-9-15-3 6/15/05 2:56 PM Page 8-24