Filter
Top Products
8-11
When installing the spark plug, always clean the
gasket surface and its mating surface. Wipe off
any grime from the threads and tighten it to the
specified torque.
EBU10343
Air filter cleaning
NOTE:
There is a check hose at the bottom of the air fil-
ter case. If dust or water collects in this hose,
empty the hose and clean the air filter element
and air filter case.
1. Check hose
1. Remove the front cover by removing the
bolts.
1. Front cover 2. Bolt (×2)
Tightening torque:
Spark plug:
12.5 Nm (1.25 m0kgf, 9.1 ft0lbf)
q
q
w
w
5TH-9-15-3 6/15/05 2:56 PM Page 8-11