Filter
Top Products
8-7
1. Drain bolt
6. Install the drain bolt and tighten to specifi-
cation.
7. Fill the engine with oil and install the dip-
stick.
cC
Be sure no foreign material enters the
crankcase.
8. Warm up the engine for several minutes at
idle speed. Check for oil leakage while
warming up.
cC
If oil leakage is found, stop the engine imme-
diately and check for the cause.
q
Tightening torque
Drain bolt:
20 Nm (2.0 m0kgf, 14 ft0lbf)
Recommended oil type:
YAMALUBE 4 (20W40) or SAE 20W40
YAMALUBE 4 (10W30) or SAE 10W30
SAE 5W30
Recommended oil classification:
API Service SE, SF, SG type or higher
Oil quantity:
Periodic oil change:
0.8 L (0.70 Imp qt, 0.85 US qt)
5TH-9-15-3 6/15/05 2:56 PM Page 8-7