Yamaha LIT-11626-19-64 Offroad Vehicle User Manual


 
8-26
EBU01220
Knuckle shaft and steering shaft lubrication
Lubricate the pivot points using a grease gun.
1. Grease nipple
EBU01112
Wheel removal
1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
1. Wheel nut (×4) 2. Wheel nut (×3)
EBU00871
Wheel installation
When installing the wheel, reverse the removal
procedure.
Tighten the wheel nuts to the specified torques.
q
q
1
1
w
Tightening torque:
Wheel nut:
Front: 28 Nm (2.8 m0kgf, 20 ft0lbf)
Rear: 28 Nm (2.8 m0kgf, 20 ft0lbf)
Front
Rear
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
5TH-9-15-3 6/15/05 2:56 PM Page 8-26