Filter
Top Products
206
Audio (option)
Cassette player HU-450
Cassette opening
Insert the cassette in the slot with the wider
part to the right. TAPE Side A appears in the
display. When one side is finished, the player
automatically plays the other side (auto
reverse). To play a cassette that is already in
the player, turn the SOURCE knob or press
the TAPE shortcut key.
Changing tape direction
Press the REV button in order to play the
other side of the cassette; the side being
played will be shown in the display.
Cassette eject
If you press the button, the
tape stops and the cassette
is ejected. Turn the
SOURCE knob to select a
new programme source. The
cassette can be inserted or
ejected even if the system is switched off.
Dolby B Noise Reduction
This is a preset function which can be
switched off as follows: press and hold the
REV button until the Dolby symbol disap-
pears from the display. Press the same
button again in order to reactivate the Dolby
function.
Dolby Noise Reduction is manufactured
under license of Dolby Laboratories
Licensing Corporation. Dolby and the double
D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Scanning
Scan plays the first ten
seconds of each track.
Press the SCAN or EXIT
button when you find a track
you wish to listen to.
Fast forward/reverse
The tape is fast forwarded
by pressing and holding
and is rewound with .
"FF" (fast forward) or
"REW" (rewind) is shown in
the display during this time.
Press the button again to stop fast
forwarding/rewinding.
Next track, Previous track
Pressing automatically fast forwards the
tape to the next track. Pressing automati-
cally rewinds the tape to the previous track.
For this function to be operational, there must
be a five second pause between tracks. If the
car is equipped with a steering wheel keypad,
the arrows can also be used.