Filter
Top Products
180
Maintenance and service
Replacing bulbs
Fog lamp
Front fog lamps (option)
To remove the bulb:
– Switch off all lights and turn the ignition
key to position 0.
– Turn the bulb holder slightly
anticlockwise.
– Pull out and remove the bulb.
To fit:
– Fit the new bulb. In can only be
positioned one way.
– Refit the bulb holder, turn it clockwise
slightly. The "TOP" mark must be upward.
Side direction indicator
Side direction indicators
To remove the bulb:
– Open the front door halfway.
– Slide your hand behind the front wing and
press out the lamp together with lamp
housing. Do not disconnect the leads.
– Turn the bulb holder a quarter turn
clockwise and pull it straight out of the
lamp housing.
– Detach the bulb from the connector by
pulling it straight out.
To fit:
– Connect the new bulb to the connector
and fit it in the lamp housing by turning it
a quarter turn clockwise.
– Refit the lamp with lens in the front wing.
Press it straight inward.