Volvo V70 Automobile User Manual


 
2006 VOLVO V70
The position of the seat is now stored in the remote control.
Automatic seat adjustment
To move the seat to the position in which you left it:
1. Unlock the driver's door with the same remote control (the one used to lock the doors).
2. Open the driver's door within 2 minutes.
The driver's seat will automatically move to the position in which you left it.
NOTE:
· The seat will move to this position even if someone else has moved it to a different seating position and
locked the car with a different remote control.
· This feature will work in the same way with all of the remote control transmitters (up to 3) that you use
with your vehicle.
· This feature will not function if your lock your vehicle with the key.
WARNING!
Because the driver's seat can be adjusted with the ignition off, children should never be left
unattended in the car.
Movement of the seat can be STOPPED at any time by pressing any button on the power seat
control panel.
Do not adjust the seat while driving. The seat should be adjusted so that the brake pedal can be
depressed fully. In addition, position the seat as far rearward as comfort and control allow.
The seat rails on the floor must not be obstructed in any way when the seat is in motion.
pg. 59 Front seats
Programming the driver's seat memory (option)*
Three different seating and door mirror positions can be stored in the driver seat's memory.
The following example explains how button 1 can be programmed.
Buttons 2 and 3 can be programmed in the same way.
file:///K|/ownersdocs/2006/2006_V70/06v70_04a.htm (3 of 11)12/30/2006 4:50:24 PM