2006 VOLVO V70
Reducing wind noise and improving fuel economy
To maximize fuel efficiency and minimize wind noise, Volvo recommends that load carriers be removed
when not in use.
Fitting the load carriers (accessory)
Make sure that the load carrier is pressed firmly out against the roof rail. Screw the load carrier in place.
Use the supplied torque wrench and tighten to the mark on the wrench (corresponding to 6 Nm). See
illustration.
Load carrier cover
The car's ignition key or the stud on the edge of the supplied torque wrench can be used to undo or
tighten the cover. Turn a quarter turn (90 degrees). See illustration.
file:///K|/ownersdocs/2006/2006_V70/06v70_06a.htm (24 of 25)12/30/2006 4:50:28 PM