Filter
Top Products
1993 Volvo 940
should be between the MIN and MAX marks. Wipe the dipstick with a clean cloth.
Warning! The oil may be very
hot
Do not use rags that could leave lint on the dipstick.
The transmission is topped up via the dipstick tube.
The space between the MIN and MAX marks on the dipstick corresponds to 0.5 US qt (0.5 liter). Do not fill
the transmission with too much oil, since this can result in oil being ejected from the transmission.
Too little oil, on the other hand, can negatively affect transmission operation, particularly in very cold
weather.
pg. 8:14 Cooling system
If you change the coolant yourself, your Volvo dealer can also assist you in disposing of the used coolant.
Check coolant level
The cooling system must be filled with coolant and not leak to operate at maximum efficiency. Check the
coolant level regularly. The level should be between the "Max" and "Min" marks on the expansion tank. The
check should be made with particular thoroughness when the engine is new or when the cooling system has
been drained.
Do not remove the filler cap other than for topping-up with coolant. Frequent removal may prevent coolant
circulations between the engine tank during engine warm-up and cooling.
Changing coolant
Normally, the coolant does not need to be changed. If the system must be drained, use the following
procedure:
file:///K|/ownersdocs/1993/1993_940/93940_8_13.html (2 of 6)12/30/2006 9:44:36 AM