Filter
Top Products
1993 Volvo 940
NOTE:
To avoid excessive wear and the necessity of rebalancing, mark and reinstall wheels in same location
and position as before removal. To lessen the chance of imbalance, each wheel hub is equipped with a
guide stud to ensure that a removed wheel can be reinstalled in its original position (as when changing
over to winter tires/wheels). When reinstalling the wheel cap, allow a gap of approximately 1/5" (5
mm) between the cap and the rim to help prevent imbalance.
NOTE: The crank handle on the jack can be forlded out by pressing the nob on the handle downward
(see illustration above). To attach the jack, refer to the illustration on the following page.
pg. 6:4 Wheel changing (cont.)
file:///K|/ownersdocs/1993/1993_940/93940_6_1.html (2 of 4)12/30/2006 9:44:31 AM