Vanguard 432447 Automobile Parts User Manual


 
14
13
TURBOCHARGER
7. Install coolant outlet hose from turbocharger to
coolant inlet housing as shown, Fig. 36. Install
clamps with tabs as shown.
Fig. 36 – Install Coolant Outlet Hose
8. Install coolant inlet hose over inlet tube up to
yellow mark on tube. Install clamps with tabs as
shown.
Fig. 37 – Install Coolant Inlet Hose
A
YELLOW
MARK
B
9. Install air intake pipe.
a. Torque nuts to 13.0 Nm (115 in. lbs.).
Fig. 38 – Installing Air Intake Pipe
AIR INTAKE PIPE
10. Align the match marks (white paint), and install the
air intake hose onto the air intake pipe.
Installation direction of clamps:
A
Install the clamp so that tabs face rear of
engine.
B
Install the clamp so that tabs face out.
Fig. 39 – Installing Air Intake Hose
B
A