Filter
Top Products
40
Connecting
When the ignition is turned to on with the
Bluetooth signal activated, this unit searches for
the last-connected Bluetooth device, and
connection is made automatically if possible.
This chapter explains how to connect manually
to registered Bluetooth devices.
Before starting, be sure to activate the Bluetooth
signal both on this unit (page 47) and the other
Bluetooth device.
1 Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
2 Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
3 Touch “Device List.”
The list of registered Bluetooth devices
appears.
To scroll the list, touch v/V.
4 Touch the device to connect.
5 Select the connection type.
Touch “Handsfree Connect” to use for
handsfree calling.
Touch “Audio Connect” to use for audio
streaming.
Connection is complete.
When connection is made successfully, or
appears at the bottom of the display.
In the device list, the currently connected
device is indicated by the icon at the head of
its name.
To connect from the other Bluetooth
device
Operate the other Bluetooth device to connect to
this unit.
When connection is made successfully, or
appears at the bottom of the display.
To disconnect
1 Follow steps 1 to 3 above.
2 Touch the currently connected device, then
“Handsfree Disconnect” or “Audio
Disconnect.”
To delete all registrations
1 Follow steps 1 to 3 above.
2 Touch “Delete All,” then “Yes” to confirm.
To delete an individual registration
1 Follow steps 1 to 3 above.
2 Touch the device to delete, then touch “Delete
this device from List.”
3 Touch “Yes” to confirm.
To connect to the last-connected
device from this unit (Bluetooth
Audio only)
Touch “Source List,” “BT Audio,” then
“Connect.”
Note
If connection is made during audio streaming, noise
may occur over playback sound.
Tip
You can connect a cellular phone for audio streaming
if it supports A2DP (Advanced Audio Distribution
Profile).
Handsfree calling
Once the unit is connected to the cellular phone,
you can make/receive handsfree calls by
operating this unit.
Making calls
By dialing a phone number
1 Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
2 Touch “Call Menu,” then “Dial.”
The number input display appears.
ATT
P1
P4
P2
P5
P3
Voice Dial
P6
BT Menu
BT phone
Preset Dial
Call Menu PB Access
Top
Back
Navi
ATT
1 2 3 4 5
6 7 8 9 0
Back
Dial
Please input phone number.
Top