Filter
Top Products
20
Reception indications
A Current source icon*
1
B Band name, preset number*
2
, frequency*
3
/
status
C Volume level*
4
D Setting status (EQ7, RBE)
*1 Appears only when the controls are displayed.
*2 Appears only when a preset station is received.
*3 While receiving an RDS station, the program
service name appears. For details, see “RDS” on
page 21.
*4 When ATT is activated, appears.
Storing and receiving stations
Caution
When tuning to stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1 Touch “Source List,” then “Tuner.”
To change the band, touch “Band,” then select
the desired band (“FM1,” “FM2,” “FM3,”
“MW,” or “LW”).
2 Touch “Preset List,” then “BTM.”
The unit stores the first six available stations
in the preset list (“P1” to “P6”).
A beep sounds when the setting is stored.
Storing manually
1 While receiving the station that you
want to store, touch “Preset List.”
2 Touch “Memory,” then touch a number
in the list (“P1” to “P6”).
The number and the confirmation display
appear.
3 Touch “Yes.”
The station is stored.
Note
If you try to store another station to the same number,
the previously stored station will be replaced.
Tip
When an RDS station is stored, the AF/TA setting is
also stored (page 21).
Receiving stored stations
1 Select the band, then touch “Preset
List.”
2 Touch the desired number (“P1” to
“P6”).
0 “Receive Menu”
Touch to open the receive menu, which
contains the following items.
• “Mono”: Touch to activate monaural
mode if FM reception is poor. To restore
stereo reception, select “OFF.”
• “Local”: Touch to tune only to stations
with strong signals. To tune normally,
select “OFF.”
• “Regional” (page 21)
qa “Preset List”
Touch to list up stored stations, or store
stations. (page 20)
qs “PTY List”
Touch to open the PTY list. (page 22)
ATT
Band
Receive
Menu
Preset
List
PTY
List
TA AF Navi Top
15
Source List
C
B
A
D