Filter
Top Products
LIGHT FLASH
If your vehicle has Remote Keyless Entry (RKE),
this feature, which allows the vehicle’s exterior
hazard/turn signal lighting to flash every time the
lock, unlock, or trunk release buttons on the
RKE transmitter are pressed, can be enabled or
disabled. When LIGHT FLASH appears on
the display, press and hold the reset button for at
least one second to scroll through the available
settings:
OFF: The exterior hazard/turn signal lighting will
not flash when the lock, unlock, or trunk release
buttons on the RKE transmitter are pressed.
ON (default): The exterior hazard/turn signal
lighting will flash when the lock, unlock, or trunk
release buttons on the RKE transmitter are
pressed.
See Remote Keyless Entry (RKE) System
Operation on page 96 for more information.
Choose one of the available settings and press
the information button to select it and move on to
the next feature.
DELAY LOCK
This feature, which delays the actual locking of the
vehicle, can be enabled or disabled. When
DELAY LOCK appears on the display, press and
hold the reset button for at least one second
to scroll through the available settings:
ON (default): The doors will not lock until
five seconds after the last door is closed. You can
temporarily override delayed locking by pressing
the power lock switch or the lock button on
the Remote Keyless Entry (RKE) transmitter a
second time.
OFF: The doors will lock immediately when
pressing the power lock switch or the lock button
on the RKE transmitter.
See Power Door Locks on page 103, Delayed
Locking on page 103, and Remote Keyless Entry
(RKE) System Operation on page 96 for more
information.
Choose one of the available settings and press
the information button to select it and move on to
the next feature.
214