Filter
Top Products
Disarming the System
To disarm the system:
• Press the RKE transmitter unlock button.
• Turn the ignition to ON to disarm the system.
Once the system is disarmed, the security light will
stop flashing.
How the System Alarm is Activated
To activate the system if it is armed:
• Open the driver’s door or trunk. This will
cause a ten second pre-alarm chirp followed
by a thirty second full alarm of horn and lights.
• Open any other door. This will immediately
cause a full alarm of horn and lights for
thirty seconds.
• Open the hood. If the vehicle has the remote
start feature, it will activate the full alarm.
When an alarm event has finished, the system will
re-arm itself automatically.
How to Turn Off the System Alarm
To turn off the system alarm:
• Press the lock button on the RKE transmitter.
The system will then re-arm itself.
• Press the unlock button on the RKE
transmitter. This will also disarm the system.
• Insert the key in the ignition and turn it on.
This will also disarm the system.
How to Detect a Tamper Condition
If you hear three chirps when the unlock or lock
button is pressed on the RKE transmitter, it means
that the content theft security system alarm was
previously triggered.
113