Filter
Top Products
Removing the Flat Tire and
Installing the Spare Tire
1. Do a safety check before proceeding. See Changing
a Flat Tire on page 5-82 for more information.
2. Using the wheel
wrench, loosen all
the wheel nuts by
turning the nuts one
turn counterclockwise.
Do not remove
them yet.
3. Turn the jack adjusting knob clockwise by hand to
raise the jack lift head.
4. Place the handle, extension, and wheel wrench
onto the jack.
A. Front Frame/
Rear Axle
B. Jack
C. Handle
D. Extension(s)
E. Wheel Wrench
5. Place the jack in the appropriate position nearest
the flat tire.
Front Position Rear Position
5-86