Filter
Top Products
DVD Player Buttons (Without Sunroof)
O (Power): Press to turn the RSE system on and off.
The power indicator light illuminates when the power
is on.
X (Eject): Press to eject a DVD or CD.
SRCE (Source): Press to switch between the DVD
player and an auxiliary source.
c (Stop): Press to stop playing, rewinding, or fast
forwarding a DVD or CD. Press twice to return to
the beginning of the DVD.
s (Play/Pause): Press to start play of a DVD or CD.
Press while a DVD or CD is playing to pause it. Press
again to continue the play of the DVD or CD.
y (Main DVD Menu): Press to access the DVD menu.
The DVD menu is different on every DVD. Use the
navigation arrows to move the cursor around the DVD
menu. After making a selection press the enter button.
This button only operates when playing a DVD.
z (Set-up Menu): Press to adjust the color, tint,
brightness, contrast, display mode, and dynamic range
compression. The dynamic range compression
feature can be used to reduce loud audio and increase
low audio produced by some DVDs.
To change a feature back to the factory default setting,
press this button to display the feature, then press
and hold until the default setting displays.
While playing an Audio or DVD disc, press and hold z
to display and to remove the track and time information.
n, q, p, o (Menu Navigation Arrows): Use the
arrows to navigate through a menu.
r (Enter): Press to select the choices that are
highlighted in any menu.
3-88