Filter
Top Products
the display, track or elapsed time, press this button until
the desired option displays, then hold the button for
two seconds. One beep sounds and the selected display
becomes the default.
BAND: Press to listen to the radio when a CD is
playing. The inactive CD remains inside the radio for
future listening.
B (CD): Press to play a CD when listening to the
radio. The CD symbol displays when a CD is loaded.
AUTO EQ (Automatic Equalization): Press to
select an equalization setting while playing a CD.
The equalization is set whenever a CD is played.
See “AUTO EQ” listed previously for more information.
If an EQ setting for a CD is selected, it is activated
each time a CD plays.
Playing an MP3 CD-R Disc
The vehicle’s radio system may have the MP3 feature.
If it has this feature, it is capable of playing an MP3
CD-R disc. For more information on how to play an MP3
CD-R disc, see Using an MP3 on page 3-68 later in
this section.
CD Messages
CHECK CD: If this message displays and/or the CD
ejects, it could be for one of the following reasons:
• It is very hot. When the temperature returns
to normal, the CD should play.
• The road is very rough. When the road becomes
smoother, the CD should play.
• The CD is dirty, scratched, wet, or upside down.
• The air is very humid. If so, wait about an hour
and try again.
• The format of the CD may not be compatible.
See Using an MP3 on page 3-68 later in this
section.
• There could have been a problem while burning
the CD.
• The label could be caught in the CD player.
If the CD is not playing correctly, for any other reason,
try a known good CD.
If any error occurs repeatedly or if an error cannot be
corrected, contact your dealer. If the radio displays
an error message, write it down and provide it to your
dealer when reporting the problem.
3-67