Filter
Top Products
Seat Recall
Press q until SEAT RECALL: OFF appears in the
display. To select your preference for recall of the
driver’s memory seat and adjustable pedals, if your
vehicle has this feature, press
r while SEAT
RECALL: OFF is displayed on the DIC. Pressing
r
will scroll through the following settings:
SEAT RECALL: OFF (default): The driver’s memory
seat and adjustable pedals position you saved will only
be recalled when the memory button 1 or 2 is pressed.
SEAT RECALL: AT KEY IN: The driver’s memory seat
and adjustable pedals position you saved will be
recalled when you put the key in the ignition.
SEAT RECALL: ON REMOTE: The driver’s memory
seat and adjustable pedals position you saved will
be recalled when you unlock the vehicle with the
Remote Keyless Entry (RKE) transmitter. Whichever
position, 1 or 2, you programmed with the transmitter
being used to unlock the vehicle is the one that will
be recalled.
To select a setting and move on to the next feature,
press q while the desired setting is displayed on
the DIC.
See “Easy Exit Seat” under Memory Seat on page 1-3
for more information.
Alarm Warning
Press q until ALARM WARNING: BOTH appears in the
display. To select your preference for alarm warning,
press
r while ALARM WARNING: BOTH is displayed
on the DIC. Pressing
r will scroll through the following
settings:
ALARM WARNING: BOTH (default): The headlamps
will flash and the horn will chirp when the alarm is
active.
ALARM WARNING: HORN: The horn will chirp when
the alarm is active.
ALARM WARNING: LAMPS: The headlamps will flash
when the alarm is active.
ALARM WARNING: OFF: There will be no alarm
warning on activation.
To select a setting and move on to the next feature,
press
q while the desired setting is displayed on
the DIC.
See Content Theft-Deterrent on page 2-16 for more
information.
3-55