Filter
Top Products
Language
Press q until LANGUAGE: ENGLISH appears in the
display. To select your preference for display language,
press
r while LANGUAGE: ENGLISH is displayed on
the DIC. Pressing
r will scroll through the following
settings:
ENGLISH (default): All messages will appear in
English.
FRANCAIS: All messages will appear in French.
ESPANOL: All messages will appear in Spanish.
To select a setting and move on to the next feature,
press
q while the desired setting is displayed on
the DIC.
If you accidentally choose a language that you do not
want or understand, press and hold
q and the trip
information button at the same time. The DIC will begin
scrolling through the languages in their particular
language. English will be in English, Francais will be in
French, and Espanol will be in Spanish. When you see
the language that you would like, release both buttons.
The DIC will then display the information in the language
you chose.
You can also scroll through the different languages by
pressing and holding the trip reset stem for four seconds,
as long as you are in the odometer mode.
Units
Press q until UNITS: U.S. (ENGLISH) appears in the
display. To select the units of measurement in which
the DIC will display vehicle information, press
r while
UNITS: U.S. (ENGLISH) is displayed on the DIC.
Pressing
r will scroll through the following settings:
UNITS: U.S. (ENGLISH) (default): All information
will be displayed in English units.
UNITS: METRIC (km/L): All information will be
displayed in metric units.
UNITS: METRIC (L/100 km): All information will be
displayed in metric units.
To select a setting and exit out of the customizable
options, press q while the desired setting is displayed
on the DIC.
3-56