Filter
Top Products
User Guide 31
Dealer Maintenance Procedures
This section includes procedures that have a significant impact on autopilot
operation and can affect your boat’s safety. You will not need to follow
these procedures in normal operation. We therefore recommend that these
are only performed by authorized service personnel.
Accessing the dealer calibration area.
From STANDBY mode, press and hold STANDBY for 2 seconds to enter
PILOT SETUP. Then press and hold mode for 5 seconds until the dealer
calibration screen is displayed.
Subsequent presses of mode will cycle through the calibration options.
Hardware and Software version numbers
Use this screen to display the version and serial numbers for the unit.
Contrast
Use the < and > keys to adjust the contrast to a satisfactory level.
Self test
Press PILOT to start the unit test sequence and then follow the on-screen
instructions. This will test the display, buzzer and button functions.
Diagnostics
Press PILOT to display the status of the wireless link.
Handset Registration
Raymarine wireless systems demand that each wireless controller is
“registered” to a basestation, in this case a S1000. This registration process
is to prevent unauthorized control of your boat by another user nearby. Your
S1000 system is supplied with the handset pre-registered to the S1000.
There may be instances where you want to move your controller to another
boat and use it with another system. In this case, you will need to de-register
from the current system and register with the new system. You can do this
using the REGISTRATION function.