Filter
Top Products
User Guide 21
How do I adjust the autopilot settings
3
1
2
Quick Tip
press and hold
Pilot Setup
then:
MODE
MODE
STANDBY
PILOT
STANDBY
Use the Pilot Parameters screen to fine tune your autopilot. This
section is recommended for experienced users only.
1. Press and hold STANDBY for
2 seconds to enter PILOT SETUP
mode.
2. Press mode until the display
reads SETUP
3. Press the PILOT key to access
detailed setup menu.
4. Press mode to scroll thorugh
the available settings. The
current value for each will be
displayed alongside
5. Press the PILOT key to adjust
the value.
SETUP
to scroll through settings
save setting and return
to Pilot Setup menu
S1000 Settings:
Rudder Gain
Counter Rudder
Response
Auto Trim
Details of each setting are given on
the following pages
Autolearn will have set these to the optimum values.
You should not normally need to change these.
to adjust value
D7653-1
or