Filter
Top Products
8
C-Series Display Compatibility
To achieve full compatibility with a C-Series Display, your Raymarine radar
scanner may require upgrading. Please refer to the C-Series Display Owner’s
Handbook, or contact Technical Support for details.
The open array scanners cannot be powered from a C-Series display unit; they
must be connected to ship’s power using a split pedestal cable or pedestal
adaptor cable. Full details are provided in this handbook.
Warranty
To register your Pathfinder Radar Scanner ownership, please take a few minutes
to fill out the warranty registration card found at the end of this handbook. It is
very important that you complete the owner information and return the card to
the factory in order to receive full warranty benefits.
The radome scanner package includes a barcode label indicating the serial
number of the unit. This label should be stuck to the warranty registration card.
The open array scanner has two barcode labels indicating the serial numbers of
the pedestal and the antenna units. Both labels should be stuck to the warranty
registration card.
EMC Conformance
All Raymarine equipment and accessories are designed to the best industry
standards for use in the leisure marine environment.
The design and manufacture of Raymarine equipment and accessories conform to
the appropriate Electromagnetic Compatibility (EMC) standards, but correct
installation is required to ensure that performance is not compromised.
Declaration of Conformity
The following Declarations of Conformity, RT033, RT035, RT040 and RT041 apply
to the equipment described in this handbook.