Filter
Top Products
53
© 2006 directed electronics—all rights reserved
quick Reference Guide
Arming
To arm, press
. When the system arms, you will hear a short chirp, and the parking lights
will flash once.
Arming while driving
To arm the system while driving, press
on your remote control while the vehicle is running.
The system will chirp once and then once more to indicate that the ignition is on.
Disarming
To disarm, press
. You will hear two chirps, and the parking lights will flash twice.
High security disarm
For high security disarm, press
on your remote control and the siren will stop sounding.
To completely disarm the security system, press again and the system will chirp 4 or 5 times
(reporting the trigger).
Disarming without a remote control
Turn on the ignition. Press the Valet button within 15 seconds. The system should now
disarm. If it does not, you may have waited too long, so turn the ignition off and on and
try again.
Silent Mode
™
Pressing
briefly before arming or disarming will eliminate the confirmation chirp(s) for
that one operation only.
Panic Mode
Press
for 2 seconds, and you will enter Panic Mode. The siren will sound and the parking
lights will flash for 30 seconds. To stop Panic Mode at any time, press
on the remote
control again.
To remote start the vehicle
Press twice. The parking lights will turn on (if connected) and the vehicle will start and
run for the programmed period of time.
To disable the remote start system
To disable the remote start, move the shutdown toggle switch to the OFF position.
Rear Window Defogger
Press the
, , and
buttons simultaneously to turn the defogger on or off. When
a remote start is initiated, the parking lights will flash 2-times if the defogger is set to
off, and will flash 3-times if the defogger is set to on.
Location of Valet button_________________________________
Number of Valet button pulses for disarming_______________
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
✂