Filter
Top Products
43
© 2006 directed electronics—all rights reserved
or the battery has been removed, it may fall out of sync with the control
unit and fail to operate the system. To re-sync the remote simply press
several times within range of the vehicle. The alarm will auto-
matically re-sync and respond to the remote controls normally.
owner recognition
Owner Recognition is a revolutionary feature available only from
Directed. Using a Directed Bitwriter
®
, hand-held programming tool,
your dealer can program many of the system settings. The programmer
makes it possible to program different settings for each remote control
that is used with the system. Then, whenever a specific remote control
is used, the system will recall the settings assigned to that remote
control. Owner Recognition lets up to four users of the system have
different settings that meet their specific needs. It is almost like having
four separate alarms in your vehicle, one for each user.
note: Owner Recognition cannot be programmed without a
Bitwriter and the necessary software. Check with your dealer
for more information.
rapid resume logic
This Directed system will store its current state to non-volatile
memory. If power is lost and then reconnected the system will recall
the stored state from memory. This means if the unit is in Valet Mode