Filter
Top Products
28
© 2006 directed electronics—all rights reserved
To stop Panic mode press and release the
or
button, or
wait for the siren duration to end. The siren and light flash output
will cease and the alarm will return to the armed state.
“system” The system will activate the full trigger output. It will
sound the siren and flash the lights for the programmed siren
duration.
“remote” When Panic mode is activated the remote control
Notification will be the Panic mode animation.
When Panic mode stops the remote control Notification will be
the system state animation.
➜
valet mode
Valet mode will bypass the alarm system security features but leave
the convenience features operational. The alarm will not chirp, arm,
or trigger, but the keyless entry, trunk release and remote start features
continue to work normally. This is useful when the vehicle is washed/
detailed or having other services performed
“system” While in Valet mode the led will turn on each time the
ignition is turned off. To save battery power, the led will not stay
on for more than one hour after each ignition off.
“remote” When entering Valet mode, the remote control
Notification will be a single beep and the Valet mode anima-
tion.