Filter
Top Products
107
MAINTENANCE
Supporting Utility Vehicle On Jack Stands
For service work under the utility vehicle, or to remove the wheels, always support the utility
vehicle with jack stands or blocks of adequate capacity for weight of utility vehicle. See
specifications page 120.
Always park the utility vehicle on a flat level surface. Put gear selector in Park, stop the
engine and exit the vehicle.
If removing wheel(s), loosen the wheel nuts slightly before lifting the vehicle.
WARNING! Instructions are necessary before operating or servicing machine. Read and understand
the Operator’s Manual, Operator’s Handbook (if equipped) and signs (decals) on machine. Follow
warnings and instructions in the manuals when performing repairs, adjustments or service. Check for
correct function after adjustments, repairs or service. Untrained operators and failure to follow
instructions can cause injury or death.
Place the jack stands under the front and rear frames of
the utility vehicle (both sides).
Tip: When lifting the utility vehicle, place jack under front and
rear frame.
Jack Stands