Pioneer AVIC-90DVD GPS Receiver User Manual


 
93
Chapter 4
Utilizing Various Information
Changing background picture stored on a disc (AV Background
only)
1 Select “Settings”, “Background Picture Setting” from the Main menu, and click the
OK button.
Background Picture Setting menu is displayed. The picture selected at each screen is indi-
cated on the right side of “AV Background” and “Navigation Background” items.
2 Select “AV Background” and click the OK button.
The list of the pictures available is displayed. If you want to install a picture directly from
PC card, refer to Step 4 onwards in “Selecting a picture stored in PC card”.
3 Select a picture you want for the background, and click the OK button.
Shot
The message whether or not to set the picture being selected appears.
4Click the OK button.
Selected picture is set.
Only JPEG format (“.jpg”) pictures can be used as a background picture.
You can only use standard characters (alphabets of both cases : A-Z, a-z) and num-
bers (0-9) for the file name of a background picture (international (accented) charac-
ters cannot be used).
Up to maximum 2048×1536 pixels picture can be used. We cannot guarantee a proper
operation for an picture bigger than this size.
Progressive format JPEG pictures cannot be used.
When storing original pictures in a PC card, create a folder named “BG” in a PC Card,
and store the picture files in this folder. In the “BG” folder up to 20 pictures can be
stored.
When changing a picture starts, do not cut off the vehicle engine until the message
informing the completion of changing a picture is indicated. Otherwise a picture file
may be destroyed.
If a map disc is not set to the Navigation System, you cannot change the background
picture.
When the Navigation System is reset, or the language setting is changed, background
picture may be changed to the original picture. (There is also a possibility that the sys-
tem will revert to the original picture for some other reason). If this happens, reset the
background picture.