Pioneer AVIC-90DVD GPS Receiver User Manual


 
160
Other Functions
Customize the settings to suit your taste and environment.
Displaying the SET UP MENU
1Press A.MENU (AUDIO) button in each source display.
2Press
5
or to select “SETUP”, and press A.MENU (AUDIO) button.
The SETUP MENU is displayed as follows:
VIDEO SETTING, AUTO FLAP, REAR MONITOR
You can operate a desired function. For details, refer to the pages for each of the func-
tions.
Select BACK in the MENU display or press BACK button to return to the previous display.
To return to the playback display, press BAND/ESC button.
Selecting the video
Set so that only the display video can be selected. The display for this MENU is the same
regardless of which source you operate from.
1Press
5
or to select “VIDEO SETTING” from the SETUP MENU, and press A.MENU
(AUDIO) button.
2Press 22
22
/ 33
33
to select “VIDEO”.
Press 2 or 3 until the desired video setting appears in the display.
OFF (off) - VIDEO (video) - BACK UP CAMERA (back up camera) - M-DVD (Multi-
DVD)
If the equipment is connected to a RCA video input, choose VIDEO to view video of the
equipment.
When using a DVD player connected with an RCA cable, if you do not select M-DVD,
there will be no picture even if you switch sources.
When using a DVD player connected with an AV-BUS cable, do not select M-DVD. If
you do, there will be no picture.
If BACK UP CAMERA is not connected, do not select BACK UP CAMERA.
If you select “BACK UP CAMERA”, press to move to BACK UP CAMERA POLARITY,
or use 2 or 3 to select BATTERY and GROUND.