Filter
Top Products
155
Chapter 6
Combining and Using Pioneer AV Equipment
■Adjusting treble
You can adjust the cut-off frequency and the Treble level.
➲ In FRONT1 and FRONT2 modes, treble adjustment affects only the front output: rear output
cannot be adjusted.
1Press
5
or ∞ to select “TREBLE” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
2Press
5
or ∞ to adjust the treble level.
Each press of 5 or ∞ increases or decreases the bass level. +6 - -6 is displayed as the
level is increased or decreased.
3 Select the desired frequency with 22
22
/ 33
33
.
2.5k - 4k - 6.3k - 10k (Hz)
■Adjusting loudness
Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.
1Press
5
or ∞ to select “LOUDNESS” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
2Press
5
to turn loudness on.
Loudness level (e.g., LOUDNESS:ON/MODE:MID) appears in the display.
3Press
2
or
3
to select the level.
LOW - MID - HIGH
4Press ∞ to turn loudness off.
■Using subwoofer output
Pioneer AV Head Unit (AVH-P6400CD or AVH-P6400) is equipped with a subwoofer output
which can be switched on or off.
1Press
5
or ∞ to select “SUB WOOFER” from the AUDIO MENU, and press A.MENU
(AUDIO) button.
When the subwoofer controller setting is S.W. CONTROL:EXTERNAL, you cannot
select SUB WOOFER.
2Press
3
to turn subwoofer output on.
➲ You can turn off subwoofer output by pressing
22
22
. If you do not set to “ON”, you cannot
select “PHASE”, “LEVEL” or “FREQUENCY”.
3Press
5
or ∞ to select the item you want to adjust.