Pioneer AVIC-90DVD GPS Receiver User Manual


 
105
Chapter 5
Customizing Your Navigation System
Language Selection
The language displayed can be set (see “Installing the Program” on page 25).
Once you change the language, installation of the program starts.
Caution
Once the installation of the program starts, do not stop the engine of your car
and switch off the Navigation System until the installation is completed and
the map of your surroundings appears.
If you change the language used, the set password is cleared. If desired, set the password
again (see “Registering a Password” on page 76).
Return Home
Registering and changing your home location (see “Registering Your Home and Your Favorite
Location” on page 73).
Go to
Registering and changing your favorite location (see “Registering Your Home and Your
Favorite Location” on page 73).
Modify Current Location
Move the joystick to up/down or left/right to adjust the current location of your car and direc-
tion displayed on a map.
Adjust Display Position
The display position of the screen of your Navigation System is adjusted. To adjust the
screen, enter this section and move the joystick up/down and left/right. Adjust to the optimal
position, making sure that all four corners of the display are visible.
Tuner Registration
You can store the frequency of a station you frequently listen to and then call it by voice com-
mand. For details, see “Calling Radio Stations or TV Stations by Voice” on page 163.
TV Registration
You can store the channel you frequently wach and then call it by voice command. For
details, see “Calling Radio Stations or TV Stations by Voice” on page 163.