Filter
Top Products
E-Maxx
•
5
Tools, Supplies and Required Equipment
Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
1.5mm “L” wrench
Supplied Tools and Equipment
Required Tools and Equipment (sold separately)
8 AA alkaline
batteries
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
For more information on
batteries, see Use the Right
Batteries on page 10.
A peak-detecting charger
is recommended for best
performance and longest
battery life. For more
information, see Use the
Right Charger on page 12.
Pre-load spacers and shock pistons
(on parts tree) see page 20
Foam blocks (battery spacers)
see page 12
2.0mm “T” wrench 8mm/5mm wrench
Antenna nut wrench
2.5mm “L” wrench
Suspension multi-tool
Two NiMH battery packs (7.2V 6-cell
or 8.4-volt 7-cell [recommended])
Body clips
TRAXXAS
Universal wrench
NiMH battery charger
(peak detecting type recommended - see sidebar)
Warning: Lithium Polymer (LiPo) batteries should not be used with the EVX-2. The EVX-2 electronic speed control is not equipped with low-voltage detection.