Filter
Top Products
Pole Track © 2003, Hayton Systems Page 9
3.2 Quick Start Handheld
1. Connect the Pole Track terminal to the server and download all of the
application related information (see “Quick Start Installation”).
2. To calibrate (align) the touch screen then follow the on-screen directions.
3. If a new version of the application was loaded then the terminal forces you
to enter the initial settings. Enter all the fields on the
Settings
screen. If
there are no auditors in the terminal be sure to add an auditor. After you
enter the settings the terminal displays the
Help
screen.
4. Press the DATA button to move to the
main Pole Track data collection screen.
5. Enter the pole data into the main detail
screen. Tap the initials (top line) or the
summary line (second line) to activate
the
Settings
screen. Tap the
Attachmnts
field to activate the
Attachments
section.
After you enter data the terminal
displays the and
buttons.
6. To enter the
Attachments
section tap
the
Attachmnts
field on the details
screen (above). Tap to enter a
new record. Each pole record shows
only the attachments entered for that
pole.
7. To send the Pole Track data to the server press the “UTIL” button and select
. The terminal connects with the Pole Track server and sends its
data. After the terminal successfully uploads its data press
to erase the stored data.