Filter
Top Products
2.2
Return Shipment
Do not return any equipment without a Return Authorization,
obtainable from the Customer Service Department at the
number shown above.
Information describing the problem, the corrective action or work to
be accomplished at the factory, the purchase order number under
which the work is to be done, and the name of person to contact
must be included with the returned equipment.
NOTE:Equipment returned for repair that is found to be com-
pletely operational will be subject to the current “no problem
found” billing rate.
In a case such as this, Omega will attempt to
identify possible problems with the installation or application.
(800~USA-WHEN).
Have your purchase order and model number available.
2.1
Receipt of Your FMA-1900
After receiving your FMA-1900, carefully check the outside of
the packing carton for damage incurred in shipment. If the
packing carton is damaged, notify the carrier at once regarding
their liability. A report with the serial number and part number
should be submitted to Customer Service. Call 800-622-2378
for detailed instructions.
Remove the packing slip from its envelope and check that the
carton contains all parts listed. Make sure spare parts or
accessories are not discarded with the packing material. In
case of shortages, contact 800-872-9436
-2-
INSTALLATIO N