Filter
Top Products
Front facing
If you must install a child restraint in the front
seat, follow these steps:
1. Position the child restraint on the front pas-
senger seat. It should be placed in a front
facing direction only. Move the seat to the
rearmost position. Adjust the head restraint to
its highest position. Always follow the child
restraint manufacturer’s instructions. Child
restraints for infants must be used in
the rear facing direction and therefore
must not be used in the front seat.
2. Route the seat belt tongue through the child
restraint and insert it into the buckle until you
hear and feel the latch engage. Be sure to
follow the child restraint manufacturer’s in-
structions for belt routing.
3. Pull on the shoulder belt until all of the belt is
fully extended. At this time, the belt retractor
is in the automatic locking mode (child re-
straint mode). It reverts back to emergency
locking mode when the belt is fully retracted.
SSS0301 SSS0055 SSS0113
Seats, restraints and supplemental air bag systems 1-43
੬ 04.4.5/Z50-D/V5.0 ੭