Filter
Top Products
2. Add distilled water up to the UPPER LEVEL
k
1
.
3. Tighten cell plugs
k
A
.
JUMP STARTING
If jump starting is necessary, see “Jump starting”
in the “6. In case of emergency” section. If the
engine does not start by jump starting, the
battery may have to be replaced. Contact your
NISSAN dealer.
WARNING
Be sure the ignition key is in the OFF or
LOCK position. The engine could rotate
unexpectedly.
1. Visually inspect each belt for signs of unusual
wear, cuts, fraying, oil adhesion or looseness.
If the belt is in poor condition or loose, have
it replaced or adjusted by your NISSAN
dealer.
2. Have the belts checked regularly for condi-
tion and tension.
SDI1480 SDI0141
DRIVE BELTS
Maintenance and do-it-yourself 8-15
੬ 04.4.5/Z50-D/V5.0 ੭