Filter
Top Products
Stowing rear center seat belt
When folding down the rear seat, the rear center
seat belt can be retracted into a stowed position
as follows:
1. Release the connector tongue
k
1
by insert-
ing a suitable tool such as key into the
connector buckle
k
A
.
2. Secure the seat belt tongue into the retractor
base first
k
2
.
3. Then secure the connector tongue into the
retractor base
k
3
.
WARNING
¼ Do not unfasten the rear center seat
belt connector except when folding
down the rear seat.
¼ When attaching the rear center seat
belt connector, be certain that the
seatbacks are completely secured in
the latched position and the rear cen-
ter seat belt connector is completely
secured.
¼ If the rear center seat belt connector
and the seatbacks are not secured in
the correct position, serious personal
injury may result in an accident or
sudden stop.
SSS0232
1-30 Seats, restraints and supplemental air bag systems
੬ 04.4.5/Z50-D/V5.0 ੭