User’s Manual NAVIGON 2100 | 2110 max
- 10 - Before you begin
Note: Create a backup of the data contained on the memory card
provided. This is very easy to do with the NAVIGON Fresh software
which can be downloaded free of charge from our website
8www.navigon.com/max.
Note: The memory card must remain inserted in the device during
operation of the navigation system.
Note: Use only SD or MMC memory cards! Make sure that the memory
card contacts are clean and undamaged.
2.3.3 Safety guidelines when installing the device in your car
Caution! Fasten the cradle so that the navigation device is easy to see
and operate by the driver. Make sure that the driver's view of the traffic
is not impeded.
Caution! Do not attach the cradle within the working zone of any
airbags.
Caution! Do not fasten the cradle too close to the steering wheel or
other controls. The driver must not be obstructed in operating any car
functions.
Caution! When installing the cradle, make sure that it will not pose a
risk in the event of an accident.
Caution! Do not run cables directly next to safety-relevant devices and
power supplies.
Caution! Check the cradle regularly to make sure that it is securely
seated. The suction cup may become loose after a while.
Caution! After installation, check all safety-relevant equipment in the
car.
Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
Caution! Disconnect the car charger cable from the cigarette lighter
whenever you park the car. The integrated mains adapter always
consumes a small amount of energy and could drain the car battery.