Filter
Top Products
510
Practical hints
Replacing bulbs
Side marker lamp bulb
̈ Turn bulb socket 5 (୴ page 507)
counterclockwise.
̈ Pull bulb socket 5 out of the
headlamp housing.
̈ Pull the side marker bulb out of bulb
socket 5.
̈ Insert the new side marker bulb into
bulb socket 5.
̈ Insert bulb socket 5 into the
headlamp housing.
̈ Turn bulb socket 5 clockwise until it
engages.
Front fog lamp bulbs
Removing front fog lamp cover:
1 Cover
2 Front fog lamp or corner-illuminating
front fog lamp*
̈ Insert a suitable object (e.g. screwdriv-
er) at point indicated by the arrow and
pry out cover 1.
Cover 1 is released.
̈ Swing cover 1 outwards and take it
off.
You can now access the front fog lamp.
3 Retaining screws
̈ Turn retaining screws 3 counterclock-
wise.
̈ Remove front fog lamp 2 out of the
bumper.
̈ Pull electrical connector off.
!
If not done carefully and properly, damage
to the bumper can result. We therefore recom-
mend that you have this work carried out by an
authorized Mercedes-Benz Light Truck Center.
164.boo Seite 510 Freitag, 30. März 2007 12:54 12