Filter
Top Products
358
Operation
Driving instructions
Tires
ț Check the tread depth and maintain
specified tire inflation pressure
(a placard with the recommended tire
inflation pressures is located on the
driver’s door B-pillar (
୴ page 388)).
ț Check tires for possible damage and
remove foreign objects.
ț Replace missing valve caps.
Rims
ț Dented or bent rims can cause tire in-
flation pressure loss and damage the
tire beads. For this reason, check and,
if necessary, change rims before driv-
ing off-road.
Vehicle tool kit
ț Check if the vehicle jack (୴ page 492)
is functional.
ț In all cases take the vehicle tool kit, a
strong tow rope, a shovel and a small
plank (to put under the vehicle jack on
sandy soil) with you.
Driving in steep terrain
Slope angle
1 Overhang angle, front
2 Overhang angle, rear
ț Comply with the warnings
(
୴ page 355) and rules for off-road
driving (
୴ page 356).
ț Driving on embankments, slopes and
other steep inclines should only be
done straight up or downhill, i.e. in the
line of gravity. Maximum vehicle climb-
ing ability is a 100% grade which is
equivalent to a slope angle of
45 degrees. Keep in mind that the
climbing ability of the vehicle depends
on terrain conditions.
Vehicles with air sus-
pension program
1 2
Raised level 34° 28°
Highway 29° 23°
Vehicles with
enhanced off-road
package*
1 2
Off-road-level 3 36° 30°
Off-road-level 2 34° 28°
Off-road-level 1 31° 25°
Highway 29° 23°
164.boo Seite 358 Freitag, 30. März 2007 12:54 12