Filter
Top Products
183
Controls in detail
Control system
Distance warning function*
(Canada only)
In vehicles equipped with Distronic*, you
can determine whether the distance warn-
ing function is to be enabled or disabled.
With this function set to
On
, the system will
alert you when recognizing a stationary ob-
stacle or a slower vehicle moving in your
vehicle’s path and the danger of a collision
exists, even when the Distronic* is
switched off.
̈ Press button è or ÿ repeatedly
until the message
Distance Warning
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç to switch
the distance warning function
On
or
Off
.
1 Symbol for activated distance warning
function
If the distance warning function is
activated you will see the : symbol in
the Standard display. When the distance
warning function is deactivated the
: symbol will not appear.
DSR (Downhill Speed Regulation)
programmed default speed
In the
DSR
menu, you can program the
default speed the DSR is set to when it is
activated.
You can program the default speed be-
tween 4-10 mph (Canada: 6-18 km/h).
The set value is increased in 1 mph
(Canada: 2 km/h) increments.
̈ Press button è or ÿ repeatedly
until the message
DSR Speed
appears in
the multifunction display.
The selection marker is on the current
setting.
୴୴
164.boo Seite 183 Freitag, 30. März 2007 12:54 12