Filter
Top Products
210
Controls in detail
Audio system
Placing a call
Entering a telephone number and
starting the dialing process
̈ Enter desired telephone number using
buttons 1 to R.
The number can have up to 32 digits,
but only twelve of these are visible in
the display.
̈ If necessary, correct number entered
with the
CLR
soft key. Press soft key
briefly to delete the last digit entered;
press soft key and hold to delete the
complete number.
̈ After correct telephone number has
been entered, press s button.
Phone book
The numbers stored in the phone book of
the telephone can be called up either by
name or number.
In addition, incoming calls are stored in the
phone book.
ț Searching and calling up telephone
book entries by name
You can access your mobile
telephone’s phone book using the
audio system. You can access both the
main entries and the sub-entries of
your phone book.
̈ Press
MEM
soft key or press
button ‚ or ƒ.
̈ Press desired numerical key 2
to 9.
The stored entries are selected
according to the alphabetical order
of the initial letters (e.g. for
S
-Smith, press button 7 four
times).
or
̈ Press and hold button ‚
or ƒ.
The system jumps from one initial
letter to the next in ascending or
descending order.
i
If the telephone number has been saved to-
gether with a name in the telephone book, the
name will appear in the display.
i
This is only possible, however, when the call
information transmitted includes the number of
the person calling. If the telephone number is not
transmitted,
NO NUMBER
will be stored in the
phone book.