Filter
Top Products
113
Controls in detail
Lighting
Combination switch
Combination switch
1 High beam
2 High beam flasher
High beam
̈ Turn the exterior lamp switch to
position B (
୴ page 109).
̈ Push the combination switch in
direction of arrow 1 to switch on the
high beam.
The high beam headlamp indicator
lamp A in the instrument cluster
comes on (
୴ page 24).
̈ Pull the combination switch in direction
of arrow 2 to its original position to
switch off the high beam.
The high beam headlamp indicator
lamp A in the instrument cluster
goes out.
High beam flasher
̈ Pull the combination switch briefly in
direction of arrow 2.
Corner-illuminating front fog lamps*
(C 230 (Canada only), C 280, C 350 and
models with 4MATIC: with Bi-Xenon*
headlamps)
The corner-illuminating front fog lamps
improve illumination of the area in the
direction into which you are turning.
The corner-illuminating front fog lamps will
operate with the engine running and with
ț the exterior lamp switch in
position B (
୴ page 109)
or
ț the exterior lamp switch in
position U (
୴ page 109)
or
ț the daytime running lamp mode
activated (
୴ page 111)
i
With the automatic headlamp mode activat-
ed: The corner-illuminating front fog lamps will
only come on in low ambient lighting conditions.
i
If you are driving faster than 25 mph
(40 km/h) or have the front fog lamps switched
on, the corner-illuminating front fog lamps
function is not available.