Filter
Top Products
102
Controls in detail
Seats
Head restraint height (rear outer seats)
1 Release button
Raising
̈ Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button 1 and pull the
head restraint up.
Lowering
̈ To lower the head restraint, push
release button 1 and push down on
the head restraint.
Folding head restraints back with
release button
The rear seat head restraints can be folded
backward for increased visibility.
1 Release button
̈ Push release button 1.
The head restraint will fold backward.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
i
Adjust the head restraint in such a way that
it is as close to the head as possible.
i
You can also fold the rear outer seat head
restraints back using the switch in the center
console.