Filter
Top Products
74
Safety and Security
Occupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.
1 Cover of top anchorage ring
̈ Remove cover 1 from anchorage ring.
̈ Store cover 1 in a convenient place
(e.g. glove box).
̈ Guide tether strap between head re-
straint and top of seat back.
Head restraints must be positioned such
that the top tether strap can pass freely
between the head restraint and top of seat
back.
̈ Make sure the tether strap is not twist-
ed.
Warning! G
When using a BabySmart
TM1
compatible
child seat on the front passenger seat, the
passenger front air bag will not deploy only
if the
58 indicator lamp remains il-
luminated.
Make sure to check the 58 indica-
tor lamp every time you use the special sys-
tem child seat. Should the
58
indicator lamp go out while the restraint is
installed, please check installation. If the
58 indicator lamp remains out, do
not use the BabySmart
TM
restraint to trans-
port children on the front passenger seat un-
til the system has been repaired.
1
BabySmart
TM
is a trademark of Siemens Automo-
tive Corp.
Warning! G
Do not place powered-on laptops, cell
phones, electronic tags such as those used
in ski passes and like electronic devices on
the front passenger seat. Signals from such
devices may interfere with the BabySmart
TM
system. Such signal interference, for exam-
ple, may cause the
58 indicator
lamp not to come on or be continuously lit
during self-test, indicating that the system is
not functioning.