Filter
Top Products
289
Operation
Engine compartment
Checking the engine oil level with the
control system
When checking the oil level
ț the vehicle must be parked on level
ground
ț with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least five minutes with the
engine turned off
ț with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
To check the engine oil level via the multi-
function display, do the following:
̈ Switch on the ignition (୴ page 34).
The standard display (
୴ page 148) should
appear in the multifunction display.
̈ Press button k or j on the
steering wheel until the following mes-
sage is seen in the multifunction dis-
play:
One of the following messages will sub-
sequently appear in the indicator:
ț
ENGINE OIL LEVEL
OK
ț
ADD 1.0 QT. TO
REACH MAX. OIL LEVEL
(Canada:
1.0 LITER
)
ț
ADD 1.5 QTS. TO
REACH MAX. OIL LEVEL
(Canada:
1.5 LITERS
)
ț
ADD 2.0 QTS.
TO REACH MAX. OIL LEVEL
(Canada:
2.0 LITERS
)
̈ If necessary, add engine oil.
For adding engine oil (
୴ page 292).
For more information on engine oil, see the
“Technical data” section (
୴ page 434) and
(
୴ page 437).
i
If you want to interrupt the checking
procedure, press the k or j
button on the multifunction steering
wheel.